dmesg - ATI Radeon HD 5700
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.7.0-030700-generic (root@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201212102335 SMP Tue Dec 11 04:36:24 UTC 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf64afff] usable
BIOS-e820: [mem 0x00000000bf64b000-0x00000000bf694fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf695000-0x00000000bf69cfff] ACPI data
BIOS-e820: [mem 0x00000000bf69d000-0x00000000bf6a0fff] reserved
BIOS-e820: [mem 0x00000000bf6a1000-0x00000000bf6a3fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf6a4000-0x00000000bf6a4fff] usable
BIOS-e820: [mem 0x00000000bf6a5000-0x00000000bfa2ffff] reserved
BIOS-e820: [mem 0x00000000bfa30000-0x00000000bfa30fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfa31000-0x00000000bfa41fff] reserved
BIOS-e820: [mem 0x00000000bfa42000-0x00000000bfa48fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfa49000-0x00000000bfa70fff] reserved
BIOS-e820: [mem 0x00000000bfa71000-0x00000000bfc73fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfc74000-0x00000000bfefffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A75 Extreme6, BIOS P2.20 01/14/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF00000000 write-back
1 base 00BFF00000 mask FFFFF00000 uncachable
2 base 00C0000000 mask FFC0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000240000000 aka 9216M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3071MB, range: 1MB, type UC
reg 2, base: 3GB, range: 1GB, type UC
total RAM covered: 3071M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbff00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd040-0x000fd04f] mapped at [ffff8800000fd040]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xbfefffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbfefffff] page 4k
kernel direct mapping tables up to 0xbfefffff @ [mem 0x1fffd000-0x1fffffff]
init_memory_mapping: [mem 0x100001000-0x23fffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x23fffffff] page 1G
kernel direct mapping tables up to 0x23fffffff @ [mem 0xbfefd000-0xbfefffff]
RAMDISK: [mem 0x356c8000-0x36b5bfff]
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000bf695068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bf69ba50 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120913/tbfadt-598)
ACPI: DSDT 00000000bf695150 068FD (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bfa43f80 00040
ACPI: APIC 00000000bf69bb48 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000bf69bbc0 0003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
ACPI: AAFT 00000000bf69bc00 00042 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 00000000bf69bc48 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
ACPI: SSDT 00000000bf69bc80 00695 (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x00000000-0x23fffffff]
NODE_DATA [mem 0x23fffc000-0x23fffffff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0xbf64afff]
node 0: [mem 0xbf6a4000-0xbf6a4fff]
node 0: [mem 0xbfc74000-0xbfefffff]
node 0: [mem 0x100001000-0x23fffffff]
On node 0 totalpages: 2095204
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 764184 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1290239 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf64b000 - 00000000bf695000
PM: Registered nosave memory: 00000000bf695000 - 00000000bf69d000
PM: Registered nosave memory: 00000000bf69d000 - 00000000bf6a1000
PM: Registered nosave memory: 00000000bf6a1000 - 00000000bf6a4000
PM: Registered nosave memory: 00000000bf6a5000 - 00000000bfa30000
PM: Registered nosave memory: 00000000bfa30000 - 00000000bfa31000
PM: Registered nosave memory: 00000000bfa31000 - 00000000bfa42000
PM: Registered nosave memory: 00000000bfa42000 - 00000000bfa49000
PM: Registered nosave memory: 00000000bfa49000 - 00000000bfa71000
PM: Registered nosave memory: 00000000bfa71000 - 00000000bfc74000
PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0xbff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s84736 r8192 d21760 u524288
pcpu-alloc: s84736 r8192 d21760 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2058334
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8146216k/9437184k available (7007k kernel code, 1056368k absent, 234600k reserved, 6203k data, 992k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
NR_IRQS:16640 nr_irqs:712 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2999.868 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.73 BogoMIPS (lpj=11999472)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20120913
ftrace: allocating 28504 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A8-3870 APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (23998.94 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbf64b000-0xbf694fff] (303104 bytes)
PM: Registering ACPI NVS region [mem 0xbf6a1000-0xbf6a3fff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0xbfa30000-0xbfa30fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbfa42000-0xbfa48fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xbfa71000-0xbfc73fff] (2109440 bytes)
regulator-dummy: no parameters
RTC time: 3:33:36, date: 11/30/13
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x1778-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1709] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1022:170a] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [1022:170b] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [1022:170c] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.0: reg 10: [mem 0xfeb06000-0xfeb07fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.1: reg 10: [mem 0xfeb04000-0xfeb05fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xf090-0xf097]
pci 0000:00:11.0: reg 14: [io 0xf080-0xf083]
pci 0000:00:11.0: reg 18: [io 0xf070-0xf077]
pci 0000:00:11.0: reg 1c: [io 0xf060-0xf063]
pci 0000:00:11.0: reg 20: [io 0xf050-0xf05f]
pci 0000:00:11.0: reg 24: [mem 0xfeb0d000-0xfeb0d7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfeb0c000-0xfeb0cfff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfeb0b000-0xfeb0b0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
pci 0000:00:14.1: reg 10: [io 0xf040-0xf047]
pci 0000:00:14.1: reg 14: [io 0xf030-0xf033]
pci 0000:00:14.1: reg 18: [io 0xf020-0xf027]
pci 0000:00:14.1: reg 1c: [io 0xf010-0xf013]
pci 0000:00:14.1: reg 20: [io 0xf000-0xf00f]
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
pci 0000:01:00.0: [1002:68be] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa58] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfea40000-0xfea43fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:02:00.0: reg 10: [io 0xd050-0xd057]
pci 0000:02:00.0: reg 14: [io 0xd040-0xd043]
pci 0000:02:00.0: reg 18: [io 0xd030-0xd037]
pci 0000:02:00.0: reg 1c: [io 0xd020-0xd023]
pci 0000:02:00.0: reg 20: [io 0xd000-0xd01f]
pci 0000:02:00.0: reg 24: [mem 0xfe900000-0xfe9001ff]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:03:00.0: reg 10: [mem 0xfe800000-0xfe807fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:04:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:04:00.0: reg 10: [mem 0xfe700000-0xfe7007ff 64bit]
pci 0000:04:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:04:00.0: supports D2
pci 0000:04:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 10: [io 0xb000-0xb0ff]
pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:07.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x1778-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1c) granted
ACPI: PCI Interrupt Link [LN24] (IRQs *24)
ACPI: PCI Interrupt Link [LN25] (IRQs *25)
ACPI: PCI Interrupt Link [LN26] (IRQs *26)
ACPI: PCI Interrupt Link [LN27] (IRQs *27)
ACPI: PCI Interrupt Link [LN28] (IRQs *28)
ACPI: PCI Interrupt Link [LN29] (IRQs *29)
ACPI: PCI Interrupt Link [LN30] (IRQs *30)
ACPI: PCI Interrupt Link [LN31] (IRQs *31)
ACPI: PCI Interrupt Link [LN32] (IRQs *32)
ACPI: PCI Interrupt Link [LN33] (IRQs *33)
ACPI: PCI Interrupt Link [LN34] (IRQs *34)
ACPI: PCI Interrupt Link [LN35] (IRQs *35)
ACPI: PCI Interrupt Link [LN36] (IRQs *36)
ACPI: PCI Interrupt Link [LN37] (IRQs *37)
ACPI: PCI Interrupt Link [LN38] (IRQs *38)
ACPI: PCI Interrupt Link [LN39] (IRQs *39)
ACPI: PCI Interrupt Link [LN40] (IRQs *40)
ACPI: PCI Interrupt Link [LN41] (IRQs *41)
ACPI: PCI Interrupt Link [LN42] (IRQs *42)
ACPI: PCI Interrupt Link [LN43] (IRQs *43)
ACPI: PCI Interrupt Link [LN44] (IRQs *44)
ACPI: PCI Interrupt Link [LN45] (IRQs *45)
ACPI: PCI Interrupt Link [LN46] (IRQs *46)
ACPI: PCI Interrupt Link [LN47] (IRQs *47)
ACPI: PCI Interrupt Link [LN48] (IRQs *48)
ACPI: PCI Interrupt Link [LN49] (IRQs *49)
ACPI: PCI Interrupt Link [LN50] (IRQs *50)
ACPI: PCI Interrupt Link [LN51] (IRQs *51)
ACPI: PCI Interrupt Link [LN52] (IRQs *52)
ACPI: PCI Interrupt Link [LN53] (IRQs *53)
ACPI: PCI Interrupt Link [LN54] (IRQs *54)
ACPI: PCI Interrupt Link [LN55] (IRQs *55)
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf64b000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf6a5000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x1778-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0063]
pnp 00:02: [io 0x0065]
pnp 00:02: [io 0x0067-0x006f]
pnp 00:02: [io 0x0072-0x007f]
pnp 00:02: [io 0x0080]
pnp 00:02: [io 0x0084-0x0086]
pnp 00:02: [io 0x0088]
pnp 00:02: [io 0x008c-0x008e]
pnp 00:02: [io 0x0090-0x009f]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00b1]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c51]
pnp 00:02: [io 0x0c52]
pnp 00:02: [io 0x0c6c]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cd5]
pnp 00:02: [io 0x0cd6-0x0cd7]
pnp 00:02: [io 0x0cd8-0x0cdf]
pnp 00:02: [io 0x0800-0x089f]
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [io 0x0900-0x090f]
pnp 00:02: [io 0x0910-0x091f]
pnp 00:02: [io 0xfe00-0xfefe]
pnp 00:02: [io 0x0060-0x005f disabled]
pnp 00:02: [io 0x0064-0x0063 disabled]
pnp 00:02: [mem 0xfec00000-0xfec00fff]
pnp 00:02: [mem 0xfee00000-0xfee00fff]
pnp 00:02: [mem 0xfed80000-0xfed8ffff]
pnp 00:02: [mem 0xfed61000-0xfed70fff]
pnp 00:02: [mem 0xfec10000-0xfec10fff]
pnp 00:02: [mem 0xfed00000-0xfed00fff]
pnp 00:02: [mem 0xff000000-0xffffffff]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c51] has been reserved
system 00:02: [io 0x0c52] has been reserved
system 00:02: [io 0x0c6c] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cd5] has been reserved
system 00:02: [io 0x0cd6-0x0cd7] has been reserved
system 00:02: [io 0x0cd8-0x0cdf] has been reserved
system 00:02: [io 0x0800-0x089f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [io 0x0900-0x090f] has been reserved
system 00:02: [io 0x0910-0x091f] has been reserved
system 00:02: [io 0xfe00-0xfefe] has been reserved
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:02: [mem 0xff000000-0xffffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0290-0x029f]
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0081-0x0083]
pnp 00:04: [io 0x0087]
pnp 00:04: [io 0x0089-0x008b]
pnp 00:04: [io 0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0062-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x00f0-0x00ff]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:09: [io 0x1770-0x1777]
system 00:09: [io 0x1770-0x1777] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x0060]
pnp 00:0a: [io 0x0064]
pnp 00:0a: [irq 1]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: [mem 0xfed00000-0xfed003ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:07.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x1778-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 4 [io 0x0000-0x03af]
pci_bus 0000:06: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:06: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:06: resource 7 [io 0x1778-0xffff]
pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 10 [mem 0xc0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 21072k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb64b000-0xbf64afff] (64MB) mapped at [ffff8800bb64b000-ffff8800bf64afff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1385782416.740:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 15951
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
pcieport 0000:00:05.0: irq 42 for MSI/MSI-X
pcieport 0000:00:06.0: irq 43 for MSI/MSI-X
pcieport 0000:00:07.0: irq 44 for MSI/MSI-X
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 45 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d100 irq 45
ata2: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d180 irq 45
ata3: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d200 irq 45
ata4: SATA max UDMA/133 abar m2048@0xfeb0d000 port 0xfeb0d280 irq 45
ahci 0000:02:00.0: irq 46 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi4 : ahci
scsi5 : ahci
ata5: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900100 irq 46
ata6: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900180 irq 46
scsi6 : pata_acpi
scsi7 : pata_acpi
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb0b000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.7.0-030700-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb09000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.7.0-030700-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.7.0-030700-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb0a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.7.0-030700-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb08000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.7.0-030700-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:14.5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb06000
xhci_hcd 0000:00:10.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 50 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 51 for MSI/MSI-X
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
usb usb6: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
usb usb7: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb04000
xhci_hcd 0000:00:10.1: irq 52 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 53 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 54 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 55 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 56 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
usb usb8: SerialNumber: 0000:00:10.1
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
usb usb9: SerialNumber: 0000:00:10.1
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 10
xhci_hcd 0000:03:00.0: irq 17, io mem 0xfe800000
xhci_hcd 0000:03:00.0: irq 57 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 58 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 59 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 60 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 61 for MSI/MSI-X
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
usb usb10: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 11
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
usb usb11: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: e3c9ba861fdbed41d7ed913516075eb74194d8e6'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 5:630:564
pci_link PNP0C0F:11: hash matches
rtc_cmos 00:05: setting system clock to 2013-11-30 03:33:37 UTC (1385782417)
powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-4: new high-speed USB device number 2 using ehci_hcd
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: HDT722516DLA380, V43OA91A, max UDMA/133
ata2.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-8: OCZ-CACHE-SYNAPSE, 2.22, max UDMA/133
ata3.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: failed to get Identify Device Data, Emask 0x1
ata3.00: failed to get Identify Device Data, Emask 0x1
ata3.00: configured for UDMA/133
ata2.00: failed to get Identify Device Data, Emask 0x1
usb 1-4: New USB device found, idVendor=046d, idProduct=081a
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 1-4: SerialNumber: 15507DC0
ata2.00: failed to get Identify Device Data, Emask 0x1
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA OCZ-CACHE-SYNAPS 2.22 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: unknown partition table
sd 2:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 < sda5 sda6 >
sd 1:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2999.954 MHz
Switching to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
usb 4-5: new full-speed USB device number 2 using ohci_hcd
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 968k freed
udevd[126]: starting version 175
usb 4-5: New USB device found, idVendor=0e6f, idProduct=0213
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-5: Product: Afterglow Gamepad for Xbox 360
usb 4-5: Manufacturer: Performance Designed Products
usb 4-5: SerialNumber: 05F79686
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: irq 62 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011588000, 00:25:22:ca:fe:b3, XID 0c900800 IRQ 62
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb 10-1: new high-speed USB device number 2 using xhci_hcd
usb 10-1: New USB device found, idVendor=0c0b, idProduct=2bcf
usb 10-1: New USB device strings: Mfr=56, Product=60, SerialNumber=82
usb 10-1: Product: USB2.0 Storage Device
usb 10-1: Manufacturer: DMI
usb 10-1: SerialNumber: 200502281396
usb 10-1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 10-1: ep 0x88 - rounding interval to 32768 microframes, ep desc says 0 microframes
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
scsi8 : usb-storage 10-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 10-2: new low-speed USB device number 3 using xhci_hcd
usb 10-2: New USB device found, idVendor=046d, idProduct=c064
usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 10-2: Product: USB Optical Mouse
usb 10-2: Manufacturer: Logitech
usb 10-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:05.0/0000:03:00.0/usb10/10-2/10-2:1.0/input/input3
hid-generic 0003:046D:C064.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:03:00.0-2/input0
uvesafb: (C) 1988-2005, ATI Technologies Inc. , _113-C01201-021, 01.00, OEM: ATI ATOMBIOS, VBE v3.0
uvesafb: VBIOS/hardware supports DDC2 transfers
uvesafb: monitor limits: vf = 75 Hz, hf = 81 kHz, clk = 170 MHz
uvesafb: scrolling: redraw
uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
firewire_core 0000:04:00.0: created device fw0: GUID 008f130070910e00, S400
Console: switching to colour frame buffer device 160x64
uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
uvesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 11550k, total 16384k
fb0: VESA VGA frame buffer device
uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
scsi 8:0:0:0: Direct-Access ST320082 2A PQ: 0 ANSI: 0
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdc] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 33 00 00 00
sd 8:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 8:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
init: ureadahead main process (387) terminated with status 5
Adding 8701948k swap on /dev/sda5. Priority:-1 extents:1 across:8701948k
udevd[463]: starting version 175
lp: driver loaded but no devices found
microcode: CPU0: patch_level=0x03000027
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
microcode: CPU1: patch_level=0x03000027
microcode: CPU2: patch_level=0x03000027
microcode: CPU3: patch_level=0x03000027
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Registered led device: xpad0
input: Generic X-Box pad as /devices/pci0000:00/0000:00:13.0/usb4/4-5/4-5:1.0/input/input4
usbcore: registered new interface driver xpad
Linux video capture interface: v2.00
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 63 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input10
type=1400 audit(1385782431.284:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=983 comm="apparmor_parser"
type=1400 audit(1385782431.284:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1000 comm="apparmor_parser"
type=1400 audit(1385782431.284:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=983 comm="apparmor_parser"
type=1400 audit(1385782431.284:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1000 comm="apparmor_parser"
type=1400 audit(1385782431.284:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=983 comm="apparmor_parser"
type=1400 audit(1385782431.284:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1000 comm="apparmor_parser"
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 7745 MBytes.
[fglrx] vendor: 1002 device: 68be count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 12.10.5 [Mar 28 2013] with 1 minors
2:3:2: cannot get freq at ep 0x86
r8169 0000:05:00.0 eth0: link down
r8169 0000:05:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
2:3:3: cannot set freq 32000 to ep 0x86
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
2:3:4: cannot set freq 48000 to ep 0x86
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device (046d:081a)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
input: UVC Camera (046d:081a) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
init: failsafe main process (1304) killed by TERM signal
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
r8169 0000:05:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
type=1400 audit(1385782434.820:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1379 comm="apparmor_parser"
type=1400 audit(1385782434.820:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1379 comm="apparmor_parser"
type=1400 audit(1385782434.824:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1379 comm="apparmor_parser"
type=1400 audit(1385782434.944:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1384 comm="apparmor_parser"
ppdev: user-space parallel port driver
audit_printk_skb: 12 callbacks suppressed
type=1400 audit(1385782436.524:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1528 comm="apparmor_parser"
type=1400 audit(1385782436.524:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1528 comm="apparmor_parser"
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x422 offMax=0x2099
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.2 (interface 0x001a0005).
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
vboxpci: IOMMU not found (not registered)
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
fglrx_pci 0000:01:00.0: irq 64 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1824
[fglrx] Firegl kernel thread PID: 1825
[fglrx] Firegl kernel thread PID: 1826
[fglrx] IRQ 64 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
r8169 0000:05:00.0 eth0: link down
r8169 0000:05:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:05:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
type=1400 audit(1385783220.115:18): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1529 comm="cupsd" pid=1529 comm="cupsd" capability=36 capname="block_suspend"
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
type=1400 audit(1385784000.639:19): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1529 comm="cupsd" pid=1529 comm="cupsd" capability=36 capname="block_suspend"
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
type=1400 audit(1385784780.903:20): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1529 comm="cupsd" pid=1529 comm="cupsd" capability=36 capname="block_suspend"